Page 1 of 1

C20let parts wanted

PostPosted: 18 Jan 2016, 20:26
by 212 Brendan H
Just managed to find a c20let I know it's a long shot just wondering if there are any parts out there?
Also looking for
vectra suspension
1989 kadett pedal rack and gear linkage
Kadett suspension


Breaking vectra gsi 2000 if anyone needs any parts

Re: C20let parts wanted

PostPosted: 18 Jan 2016, 22:24
by 168 Derek S
I have used MK2 Astra GTE lowering springs and spax shocks

Re: C20let parts wanted

PostPosted: 23 Jan 2016, 17:59
by 212 Brendan H
How much do you want for them?

Re: C20let parts wanted

PostPosted: 23 Jan 2016, 20:38
by 127 Gordo
Exactly what parts are you looking for for the LET? While most are specific to the engine, some are XE parts and some other XE parts, like the camshaft(s) are regarded as performance upgrades.
I have a couple of the camshafts - in' and ex' - and matching followers that you can have relativley cheaply - you'll need a vernier pulley on the, IIRC, inlet to retard it for best results.

Re: C20let parts wanted

PostPosted: 27 Jan 2016, 20:35
by 212 Brendan H
Hi gordo I need
Intercooler and pipes
Manifold down pipe
Top hat pipe
Turbo cover
And I think that's it

Looking for some springs and shocks for a vectra also and maybe a nice set of wheels

How much do want for your cams?

Re: C20let parts wanted

PostPosted: 27 Jan 2016, 20:36
by 212 Brendan H
Hi Derek

Do you want to sell them? And if so how much? :)

Thanks

Re: C20let parts wanted

PostPosted: 28 Jan 2016, 13:41
by 001 Neville
Brendan, I think Derek is advising he has used them in the past, not that he has some to sell.

Re: C20let parts wanted

PostPosted: 28 Jan 2016, 14:49
by 212 Brendan H
Ahh yeah sorry mis read :)

Re: C20let parts wanted

PostPosted: 28 Jan 2016, 20:34
by 127 Gordo
I'll have to check the exhaust type - the drive for a distributor and a cam' position senser are different - but all the XE intakes are the same.
I'll get back to you* when I've figured out some secure packaging but I figure $150 for inlet with followers marked for postion or $250 for both, plus P&P - do you have a prefered courier or post option?
Inlet is normally retarded 7 degrees, for best rests, so that's why a vernier is required. the exhaust is fitted to stock marks but while it makes for a more powerful engine the boost is slower to come in - you lose lower rpm response.
Don't forget, you're going to need to upgrade the clutch from the XE as it will producce a lot more torque - and that'll depend on the gearbox splines and whether a flat or pot type flywheel is used.
If you haven't done so, check out Migweb for more info' on this and other options for the build.

*I may be a bit slow getting back to you as there are some things on the home front that'll have to take precedence.

Re: C20let parts wanted

PostPosted: 15 Aug 2016, 01:53
by 127 Gordo
Took a bit longer than I thought - still interested?